Gauges & Sensors

LEVEL INDICATOR: Probes holder with 5 bushes in which there are 3 stainless steel probes for waste water mixture tank units.Plastic bushes 20 mm long, to avoid risk of short circuit due to the humidity inside the tank. A panel with a scale of 3 leds is advising on the almost full tank. Both holders…

S Series Fuel/Diesel/Bio-Diesel

The S/SZ liquid level sensor from SensoTex offers reliable liquid level sensing solution by using reed switch technology. As our market orientation is five-fold: automotive, marine, agriculture, construction, and power generator, our fuel tank sensor is mainly applied to automotive, agriculture, and construction. The S/SZ liquid level sensor is not only with liquid level sensing function but also with fuel suction and return pipe which makes the sensor become one of the reliable part of the fuel system.

*Available with or without fuel suction and return pipes

*Fuel heating function on S series

*Fluid filter is standard equipment for S series and option for SZ series

*Easy twisted bayonet and SAE five holes fitment options

*Analogue output with reed switch technology

*Customizable resistance range (Ohm value) for liquid level at empty from full

*Available sensor length from 100mm to 2000mm

*Sensors are equipped with standard DIN 72585 connector, or can be also with your desired pin side connector or optional connector output with flying leads.

*Optional low level alarm to remind the driver of filling fuel up when the fuel level down to the empty

ADV- Series AdBlue/DEF

As European emission standards requiring strict measures, almost every commercial vehicle is required the employment of Selective Catalytic Reduction (SCR) system. SensoTex, as one of the leading manufacturer of liquid level sensor, offers AdBlue sensors which supplies the SCR equipped trucks and buses and makes an important contribution to efficient SCR operation. Nowadays, all truck and bus manufacturer offers SCR equipped models, our AdBlue sensor could be applied for the emission standards of Euro 4 and Euro 5.

The kind of AdBlue sensor we offer to customer is a level sensor to use in urea liquid (AdBlue/DEF). The length of our AdBlue sensor is customizable. Our AdBlue sensor is also equipped with suction and return function of AdBlue/DEF, heating tubes for thawing frozen AdBlue/DEF, temperature sensing, and filter.

*Customizable sensor length

*Water circuit from coolant system for heating to prevent AdBlue/DEF from frozen

*AdBlue/DEF suction and return pipes connected to the header

*Analogue output with reed switch technology

*Customizable resistance range (Ohm value) for liquid level at empty from full

*Filter for blocking the impurities before AdBlue/DEF fed into your SCR system

Sensor for Fuel and Water Tanks

(12/24V, St. Steel 316, SAE5)

SFW-02 Fuel/Diesel/Bio-Diesel/Water/AdBlue

Our SFW series liquid level sensors are custom-designed to your specification requirements. All of the material of our liquid level sensor is considered during the design procedure to ensure they will perfectly suit your requirement. The length and resistance range of the liquid level sensor is customizable. There are two mounting ways available as well: 1-1/4” BSP thread and SAE 5 holes for you to choose. Our liquid level sensors are compatible with most fluid types including fuel, bio-fuel, diesel, oil, water, DEF/AdBlue, and other special fluid. The liquid level sensors are designed using materials that are suitable for above applications, including aluminum, stainless steel #304/316, nylon and ABS.

Features & Options

*Analog output with reed switch technology

*Various kinds of materials for every type of liquid application

*1-1/4″ BSP thread or SAE five holes fitment options

*Customizable resistance range (Ohm value) for liquid level at empty from full

*Available sensor length from 100mm to 2000mm

*Liquid level sensors have optional connector output with flying leads or your desired pin side connector

*Optional low level alarm to remind the driver to fill up the fuel when the fuel level down to the empty

*Can be integrated with GPS tracking and monitoring system (added value)

SFW-03 Fuel/Deiesel/Bio-Diesel/Water/AdBlue

Our SFW series liquid level sensors are custom-designed to your specification requirements. All of the material of our liquid level sensor is considered during the design procedure to ensure they will perfectly suit your requirement. The length and resistance range of the liquid level sensor is customizable. There are two mounting ways available as well: 1-1/4” BSP thread and SAE 5 holes for you to choose. Our liquid level sensors are compatible with most fluid types including fuel, bio-fuel, diesel, oil, water, DEF/AdBlue, and other special fluid. The liquid level sensors are designed using materials that are suitable for above applications, including aluminum, stainless steel #304/316, nylon and ABS.

*Analog output with reed switch technology

*Various kinds of materials for every type of liquid application

*1-1/4″ BSP thread or SAE five holes fitment options

*Customizable resistance range (Ohm value) for liquid level at empty from full

*Available sensor length from 100mm to 2000mm

*Liquid level sensors have optional connector output with flying leads or your desired pin side connector

*Optional low level alarm to remind the driver to fill up the fuel when the fuel level down to the empty

*Can be integrated with GPS tracking and monitoring system (added value)

SFW-07 Water

Our SFW series liquid level sensors are custom-designed to your specification requirements. All of the material of our liquid level sensor is considered during the design procedure to ensure they will perfectly suit your requirement. The length and resistance range of the liquid level sensor is customizable. There are two mounting ways available as well: 1-1/4” BSP thread and SAE 5 holes for you to choose. Our liquid level sensors are compatible with most fluid types including fuel, bio-fuel, diesel, oil, water, DEF/AdBlue, and other special fluid. The liquid level sensors are designed using materials that are suitable for above applications, including aluminum, stainless steel #304/316, nylon and ABS.

*Analog output with reed switch technology

*Various kinds of materials for every type of liquid application

*1-1/4″ BSP thread or SAE five holes fitment options

*Customizable resistance range (Ohm value) for liquid level at empty from full

*Available sensor length from 100mm to 2000mm

*Liquid level sensors have optional connector output with flying leads or your desired pin side connector

*Optional low level alarm to remind the driver to fill up the fuel when the fuel level down to the empty

*Can be integrated with GPS tracking and monitoring system (added value)

SFW-08 Fuel/Diesel/Bio-Diesel/Water

Our SFW series liquid level sensors are custom-designed to your specification requirements. All of the material of our liquid level sensor is considered during the design procedure to ensure they will perfectly suit your requirement. The length and resistance range of the liquid level sensor is customizable. There are two mounting ways available as well: 1-1/4” BSP thread and SAE 5 holes for you to choose. Our liquid level sensors are compatible with most fluid types including fuel, bio-fuel, diesel, oil, water, DEF/AdBlue, and other special fluid. The liquid level sensors are designed using materials that are suitable for above applications, including aluminum, stainless steel #304/316, nylon and ABS.

*Analog output with reed switch technology

*Various kinds of materials for every type of liquid application

*1-1/4″ BSP thread or SAE five holes fitment options

*Customizable resistance range (Ohm value) for liquid level at empty from full

*Available sensor length from 100mm to 2000mm

*Liquid level sensors have optional connector output with flying leads or your desired pin side connector

*Optional low level alarm to remind the driver to fill up the fuel when the fuel level down to the empty

*Can be integrated with GPS tracking and monitoring system (added value)