Showing 17–32 of 32 results
-
0.00฿
12V/ 24V
A modern diaphragm pump that can be set up in several applications and with different pump motor configurations.It is easy to install as a bilge pump in any leisure craft or anywhere after the drain outlet in the waste water system or directly in the Matromarine waste water tank . No filters required, the pump can run dry, and can also handle a mixture of air and water without difficulty. Perfect for installation in tight spaces, the Laguna shower drain pump can be incorporated into a small boat bilge space. Available in version with double 19/25 mm port connection and 38 mm port connection. 38 mm version is equipped with straight and 360 degrees angled rotational port connection.
-
0.00฿
Kits Available for Electric Marine Toilets
| Code |
Description |
Key |
| 11879 |
Repair kit for the electric toilets 24V, LT-0E and LT-1E |
1 to 36 |
| 11878 |
Repair kit for the electric toilets 12V, LT-0E and LT-1E |
1 to 36 |
-
0.00฿
Kits Available for Marine Manual Toilets
| Code |
Description |
Key |
| 11451 |
Kit E, Base to Bowl Mounting Kit |
4, 9, 10, 11, 16, 17, 20, 24, 29 |
| 11447 |
Kit A, Major Service Kit for Manual Toilet LT-01 and LT-1 |
28, 31, 32, 33, 34, 35, 36, 37, 38 |
| 11535 |
Assembled Spare Pump for Manual Toilet LT-0 and LT-1 |
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 29, 30 |
-
0.00฿
Laguna Electric Toilet
12V— 11-00182
24V— 11-00183
The well proven and popular electric standard toilets with combined pump unit for flushing and wasting. All metal parts and screws are in stainless steel. The base is in impact resistant material It can be installed either above or below the sea level. A special macerator pump allows the expulsion up to 3.50 m in height. Self priming up to 1,5 mt. vertically. Equipped with seat lid and control panel. Port connections: inlet. 19mm. 3/4” and outlet 25/38mm. 1 1/2”
*All standard toilets are supplied with a one push button flushing for easiness of operation
-
0.00฿
Level Indicator
*Level Indicators and Probes
*Probe (We can supply bushes up to 30 cm high under request
Probes holder with 5 bushes in which there are 3 stainless steel probes for waste water mixture tank units.Plastic bushes 20 mm long, to avoid risk of short circuit due to the humidity inside the tank. A panel with a scale of 3 leds is advising on the almost full tank. Both holders and panels have VDO connections. 2 Version lenght available. 5 Probes model is for clear water.
-
0.00฿
Conversion Kits Manual
Converts compact and comfort bowl of most toilets with 4 bolt fixing bowls and bolt centres on a 95 mm (3 3/4”) diameter. Circle such as matromarine, Jabsco, tmc, Raritan, Rm69, Johnson pump, ,thetford, lalizas. included kit contains all necessary parts, such as stainless steel bolts and washers, hose and gaskets, and control panel in the electric std v.
-
0.00฿
LT-0 and LT-1
The LT-0 and LT-I toilets are especially designed for long term use. They are available in two sizes compact (LT-0) and regular (LT-I). Both can easily be installed above or below the waterline. If they are installed below the waterline, it is necessary to use an anti-siphon loop to prevent water inflow into the interior. Furthermore, these toilets can be installed with the pump either at the right or the left side of the porcelain bowl. The valves have been designed for a longer and more reliable service life. The drain plug has been designed with a quick fit locking mechanism for easier and more effective drainage of the toilets. All the parts are made of corrosion resistant materials.
|
Code |
Description |
Dimensions (mm) |
| A |
B |
C |
| 11510 |
LT-0 |
450 |
420 |
340 |
| 11412 |
LT-1 |
485 |
480 |
340 |
-
0.00฿
Manual Toilet Compact with Soft Close
0ur newest design allows the boat owner or service agent to easily replace the existing toilet without having to bore any new holes. can easily substitute Jabsco, Rm and many other brands.
the toilet may be mounted both above and below the waterline; the fitted pump is a self priming one; the reversible left-handed pump mounting enables to install the toilet indifferently on both sides; waste discharge is possible both overboard and into a holding tank on board; soft close plastic seat or wooden seat gross weight 10 kg
-
0.00฿
Space Saver Manual Toilet with Soft Close Seat
0ur newest design allows the boat owner or service agent to easily replace the existing toilet without having to bore any new holes. can easily substitute Jabsco, Rm and many other brands.
the toilet may be mounted both above and below the waterline; the fitted pump is a self priming one; the reversible left-handed pump mounting enables to install the toilet indifferently on both sides; waste discharge is possible both overboard and into a holding tank on board; soft close plastic seat or wooden seat gross weight 10 kg.
Code: 11-00200
-
0.00฿
New Spare Disinfectant Tablets
Code: 11866
-
0.00฿
Spare Seats Cover
Compact and comfort version are intechangeble with JABSCO, SPX, TMC, RM69, TMC toilets.
-
0.00฿
Electric Evolution Toilets
12V/ 24V
Matromarine has realized a range of toilets where performance, reliability, noise level and design have really reached the highest standards. The running cycle is completely automatic and eliminates wastewater through a high-performance pump that allows drainage of waste up to 4 m. in height and at a distance of 40 m.New flush pump integrated in the whole kit with 360º orientable discharge port connection 1” and 11/2”. Noise level is optimzed against the standard electric toilets and reduced up to 30% lower while performance is increased of 50%. A special new duck valve on the discharge port connection prevents any return of black water.
-
0.00฿
Rectangular Water Waste Kit
New updated version of the waste water kit with the macerator pump or diaphragm pump mounted and already connected to the tank. The system includes tank, macerator, y-valve is be ordered separately in all version, gas tank vent, activated carbon filter and control panel with probe to check the level in the tank. Matromarine holding tank systems are molded from linear low density polyethylene (LLDP) resin. Polyethylene is best-suited for holding tank constructions because of its resistance to corrosion and odor permeation, and it will last longer than the life of a typical fiberglass hull. ISO/USCG compliance: MATROMARINE models are fully compliant with ISO 8099:2000(E) Standards. Odour-free design: MATROMARINE tanks have extra-heavy wall thickness to prevent odour permeation. Tanks can be fitted with an activated carbon filter that stops unpleasant odours from escaping through the holding tank vent. Multiple tank outlets: most Matromarine models are equipped with two discharge outlets: one is for connection to a deckmounted discharge fitting and the other is for connection to an overboard discharge pump. Leak-proof design: Matromarine one-hose connection is located on top of the tank, thus eliminating all possibility of leakage due to a faulty connection below the liquid level of the tank contents. Our unique diptube design reduces the risk of clogging while keeping the residual contents in the tank to a minimum. New fast connection in strong PVC makes this kit the most easy-mounting and complete system for the treatment of waste waters present on the market. Available also in 24V. version upon request.
*Y-valves needs to be ordered apart for all waste kits
*All part. numbers are equipped with 12v. electrical part, upon request all models are available also at 24v.
-
0.00฿
Rounded Waste Water Tank Kits
New updated version of the waste water kit with the macerator pump or diaphragm pump mounted and already connected to the tank. The system includes tank, macerator, y-valve is be ordered separately in all version, gas tank vent, activated carbon filter and control panel with probe to check the level in the tank. Matromarine holding tank systems are molded from linear low density polyethylene (LLDP) resin. Polyethylene is best-suited for holding tank constructions because of its resistance to corrosion and odor permeation, and it will last longer than the life of a typical fiberglass hull. ISO/USCG compliance: MATROMARINE models are fully compliant with ISO 8099:2000(E) Standards. Odour-free design: MATROMARINE tanks have extra-heavy wall thickness to prevent odour permeation. Tanks can be fitted with an activated carbon filter that stops unpleasant odours from escaping through the holding tank vent. Multiple tank outlets: most Matromarine models are equipped with two discharge outlets: one is for connection to a deckmounted discharge fitting and the other is for connection to an overboard discharge pump. Leak-proof design: Matromarine one-hose connection is located on top of the tank, thus eliminating all possibility of leakage due to a faulty connection below the liquid level of the tank contents. Our unique diptube design reduces the risk of clogging while keeping the residual contents in the tank to a minimum. New fast connection in strong PVC makes this kit the most easy-mounting and complete system for the treatment of waste waters present on the market. Available also in 24V. version upon request.
*Y-valves needs to be ordered apart for all waste kits
*All part numbers are equipped with 12v. electrical part, upon request all models are available also at 24v.
-
0.00฿
Y-Valve
A universal valve to discharge either overboard or into waste tanks designed for long distance control by means of a push-pull cable. It can be used in three ways:
1) the water from the toilet is flushed into the sea or into the waste tank;
2) the water is discharged from the waste tank into the sea by means of a macerator or on the quay by means of a suction pump;
3) the macerator discharges into the sea or on the quay by means of a suction pump. Can be padlocked.
-
0.00฿
Y-Valve Model 2005
A universal valve to discharge either overboard or into waste tanks designed for long distance control by means of a push-pull cable. It can be used in three ways:
1) The water from the toilet is flushed into the sea or into the waste tank;
2) The water is discharged from the waste tank into the sea by means of a macerator or on the quay by means of a suction pump;
3) The macerator discharges into the sea or on the quay by means of a suction pump. Can be padlocked.
