Showing 1–16 of 31 results
-
0.00฿
24 Hours Vent
“24 Hours” vent is completely automatic as it works with solar energy in sunny days and batteries, during the night. Forced ventilation is controlled through a dynamic impeller, which turns clockwise to inflow and counter clockwise to exhaust air. The user adjusts the vent on the corresponding function through on/off switches. Active air movement absorbs moisture and refreshes the interior of your boat completely. Simultaneously, when water enters the vent special balls inside block its entry to achieve absolute impermeability. “24 hour” vent are made of white plastic or equipped with inox cover.
| Code |
Diameter |
Cut Area |
Cover |
| 99688 |
20 cm |
9,5 cm |
White |
| 99689 |
20 cm |
9,5 cm |
Inox |
-
0.00฿
Blower for Autonomous Solar Powered Fan
Available in:
Code: 60070—Blower w/o Battery for Autonomous Fan (12Volt)
Code: 60065—Blower & Battery for Autonomous Solar Powered Fan (1.2Volt)
-
0.00฿
Cabin vents offer natural ventilation indoors and prevent water leaks from waves and rain. They open and close manually. When open, air is circulated and water stays out of your boat. Cabin vents are made of plastic. The vent with code number 98621 is equipped with an inox cover.
-
0.00฿
Centrifugal Blowers Flange 3″
12V/ 24V
CENTRIFUGAL BLOWERS: We manufacture a wide selection of marine blowers for marineengine compartments in strong nylon pa6 material homologated by R.i.n.a and with different capacities from 280 m3 to 1000 m3 per hour screws and shaft in stainless steel. flex mount and very strong dynamic flange mount. low current draw. continuous duty. Best ratio on the market between volume air flow and compact size. all models are ignition protected iso 8846. complying with iso 8849,en 55014, iso 10133.
-
0.00฿
Centrifugal Blowers Flange 4″
12V/ 24V
CENTRIFUGAL BLOWERS: We manufacture a wide selection of marine blowers for marineengine compartments in strong nylon pa6 material homologated by R.i.n.a and with different capacities from 280 m3 to 1000 m3 per hour screws and shaft in stainless steel. flex mount and very strong dynamic flange mount. low current draw. continuous duty. Best ratio on the market between volume air flow and compact size. all models are ignition protected iso 8846. complying with iso 8849,en 55014, iso 10133.
-
0.00฿
Centrifugal Blowers Flange 6″
12V/ 24V
CENTRIFUGAL BLOWERS: We manufacture a wide selection of marine blowers for marineengine compartments in strong nylon pa6 material homologated by R.i.n.a and with different capacities from 280 m3 to 1000 m3 per hour screws and shaft in stainless steel. flex mount and very strong dynamic flange mount. low current draw. continuous duty. Best ratio on the market between volume air flow and compact size. all models are ignition protected iso 8846. complying with iso 8849,en 55014, iso 10133.
-
0.00฿
Centrifugal Blowers Flex 4″
12V/ 24V
CENTRIFUGAL BLOWERS: We manufacture a wide selection of marine blowers for marineengine compartments in strong nylon pa6 material homologated by R.i.n.a and with different capacities from 280 m3 to 1000 m3 per hour screws and shaft in stainless steel. flex mount and very strong dynamic flange mount. low current draw. continuous duty. Best ratio on the market between volume air flow and compact size. all models are ignition protected iso 8846. complying with iso 8849,en 55014, iso 10133.
-
0.00฿
Centrifugal Blowers Flex 6″
12V/ 24V
CENTRIFUGAL BLOWERS: We manufacture a wide selection of marine blowers for marineengine compartments in strong nylon pa6 material homologated by R.i.n.a and with different capacities from 280 m3 to 1000 m3 per hour screws and shaft in stainless steel. flex mount and very strong dynamic flange mount. low current draw. continuous duty. Best ratio on the market between volume air flow and compact size. all models are ignition protected iso 8846. complying with iso 8849,en 55014, iso 10133.
-
0.00฿
Inline Series Flange 7″ Version A
12V/ 24V
A modern range of inline blowers utilizing advanced fan blade design technologies suitable for bulkhead mounting and for receiving 178 mm. diameter hoses.The first vane axial-flow bilge blowers designed using aerospace technology to maximize performance. No other bilge blowers on the market provides such a powerful system output at such a low power input in so a compact size. Silent operation. For added durability, Matromarine incorporated an engineered plastic housing that withstands deformation during installation and shelters blade from housing interference. Compling with ISO 8846,EN 55014.
-
0.00฿
Inline Series Flange 7″ Version B
12V/ 24V
A modern range of inline blowers utilizing advanced fan blade design technologies suitable for bulkhead mounting and for receiving 178 mm. diameter hoses.The first vane axial-flow bilge blowers designed using aerospace technology to maximize performance. No other bilge blowers on the market provides such a powerful system output at such a low power input in so a compact size. Silent operation. For added durability, Matromarine incorporated an engineered plastic housing that withstands deformation during installation and shelters blade from housing interference. Compling with ISO 8846,EN 55014.
-
0.00฿
Plastic Bilge Strainer
| Code |
Colour |
Hose Ø (mm) |
Output |
Shape |
Dimensions (mm) |
| 13942 |
Black |
18/30/24 |
Horizontal |
Rectangular |
145x60x38 |
-
0.00฿
Plastic Strainer Grilled
Code: 16712
Features:
—Shock resistant polyamide
—Dimensions: 120x80mm
—Oval
—Black
-
0.00฿
Solar Cell for Autonomous Solar Powered Fan
Code: 60069
Thickness: 9mm x 132 mm x 132 mm
-
0.00฿
Solar Vents
Solar vents provide mechanical ventilation utilising solar energy. The solar panel activates the fan, which allows the air to flow in. These autonomous vents detect water flows from waves and rain, while refreshing the atmosphere even on those calm windless days. Special balls inside the vents are pushed by the water to shut ventilation holes and ensure impermeability. They have two functions; one function activates solar function and the other modifies the fan’s function from clockwise to counter clockwise. Solar vents are made of white plastic, while the 98681 vent is equipped with an inox cover.
| Code |
Diameter |
Cut area |
Cover |
| 98680 |
20 cm |
9,5 cm |
White |
| 98681 |
20 cm |
9,5 cm |
Inox |
-
0.00฿
Ventilation Clam Shell Cover
For additional protection against heavy water intrusions. Suitable for 3” and 4” ventilators. To be fixed on top of the ventilator with 3 nylon fasteners. Made from polyamid, shock and UV-resistant. Compatible with common sealants and impervious to acetic acids (215x180x70mm).
-
0.00฿
Ventilation Clam Shell Cover, Round
Code: 44551
Features:
—Ø 87 mm
—Ventilation shell cover
—Round
—White
